Articles, Blog

How to Replace the IR Board | HP ENVY 15-ed0000 x360 Convertible Laptop PC | HP

March 26, 2020


How to Replace the IR Board Before you begin: Remove the base enclosure, battery, and heat sink. Removal Disconnect the IR board ribbon cable from its ZIF connector on the IR board. Remove the P1 Phillips-head screw that secures the IR board to the top cover. Carefully lift the IR board out of the top cover and remove. Replacement Place the IR board onto its alignment pin on the top cover. Replace the P1 Phillips-head screw that secures the IR board to the top cover. Connect the IR board ribbon cable to its ZIF connector on the IR board.

You Might Also Like

No Comments

Leave a Reply