Although Hyundai i30 Fastback N is similarly designed as Hothatch i30N, the light harness is deeply embedded in the rear body. This solution makes the replacement a bit advanced, since it may require a plastic chisel that prevents scratching of the paint. But on the other hand, you’re gaining enough leverage for your hands in order to make the pulling out of the lights very simple The overall act as such is very easy, but very important. This type of light also includes a set of 2 pins that together with philips screws, hold the lights firmly anchored but their shape and shorten cable doesn’t give you much of operating space. As you have seen I gained the access to the bulb by turning the cover to the right side so that it can be replace with a new one directly into that socket. You just push it inside and to the left side and exchange it for a new one with alloy housing. Don’t forget also to arrange your cable management. And push the clips inside like this This access is little bit tricky, so you have to be really careful and push the socket to the left side in order to gain the access to the bulb and it’s right there Just like that you can replace it with the new led. Again. Inside. It takes some time ’cause you have to be careful. [Friends about to chatter about the car and LEDs] There is a difference… Nice! After this rain, I’m starting to like your color. I was cleaning the car yesterday. I was cleaning it on Saturday since it was really dirty. And then, I’m looking at my color… Damm, it’s not blue!